Indoor part------ Gross weight is 75kg, Size is 877cm*742cm*863cm
Outdoor part----Gross weight is 50kg, Size is 877cm*692cm*915cm
Indoor part--- Gross weight is 95kg,Size is 982cm*742cm*109cm
Outdoor part--- Gross weight is 60kg,Size is1177cm*692cm*915cm
Indoor part--- Gross weight is 120kg,Size is1144cm*742cm*128cm
Outdoor part--- Gross weight is 95kg, Size is1727cm*692cm*915cm
30 DAYS AFTER GOT THE PAYMENT
Heat-pipe air cooling system---energy saving climate control system
1. It is energy-saving air conditioner.
2. It is integrated heat-exchanger.
3. It is designed especially for all kinds of industrial machinery room, like engine room, huge warehouse, elevator machine room, electricity generation engine room, engine house, moto room, machinery room, MIS server room and ventilation equipment room.
1. Heat exchanger integrated air conditioner has two operating modes: refrigeration mode (compressor cycle) and the heat exchanger mode(heat pipe cycle).
2. Through collecting the indoor and outdoor temperature, the system chooses to run in refrigeration mode or heat pipe mode in order to ensure the indoor cooling requirements under the premise to achieve energy-saving operation objectives.
3. The working principle of the two modes described as below.
3.1 Refrigeration mode---The heat exchanger droved by compressor, the compressor drive motor will consume a lot of power, in order to ensure the effect of heat transfer, the evaporator and condenser fans usually operate at full speed , both will also consume a certain amount of power, refrigeration mode so that the input power is relatively large, high energy consumption.
3.2 Heat pipe mode---The entire energy consumption only for the evaporator and condenser fans , because the compressor is not in operation, compared to the refrigeration mode, the consumption of heat pipe mode reduce by 80% around.
Cooling capacity of refrigeration
Cooling Capacity of heat pipe
1. Heat pipe heat exchanger and compressor refrigeration are completely isolated, which completely ensures that .
1.1 The heat pipe heat exchanger system is under high vacuum condition, evaporation of oil-free in flooded status.
1.2 The refrigerant returns oil speed flow requirements.
1.3 The refrigeration evaporator dry- evaporated requirements.
1.4 The safety of the mechanical refrigeration system.
2. In refrigeration cycle, eliminate the need for multiple solenoid valve switching, decrease the possibility of refrigerant leaks , put an end due to the solenoid valve can not be absolutely closed and may cause the compressor starts liquid impact, reducing compressor failure probability , extended compressor life , while increasing the likelihood of the control system
Eliminating the need for high-pressure reservoir of the oil concerns, mechanical refrigeration compressor oil return reliable, long-running compressor unit eliminates the possibility of burning.
Some Pictures of Manufacturing Line
Should you have any questions, please don't hesitate to contact me: